Infrared Plastic Thermometer

Zhuhai Engineering Plastic Parts After-Sales Service Nansha Infrared Plastic Thermometer Distributor

Dongguan Dinghao Plastic Technology Co., Ltd. adheres to the principle that "quality is the life of enterprise development, and service is the foothold of the enterprise." Following the principle of "continuous improvement, development, and refinement," the company keeps pace with the times by fully integrating design and production, sales and service, fashion and creativity, individuality and humanity, thus forming a distinctive and positive market situation.

Purpose: Just tell us your needs, and leave the rest to us. Fully meet customers' personalized requirements and provide after-sales service.

Business Philosophy: Responsible internally to employees, externally to customers.

Service Purpose: Protect customers' interests, meet their personalized requirements, create value for customers, and pursue customer satisfaction.

Product Features: Modern, simple, fashionable, high-quality, standardized, modular.
Core Culture: Proactive work, full of passion, diligent thinking, continuous improvement.
Sales Method: Consultative and service-oriented sales approach.

Name: Handheld Thermometer Housing

Model: MPT-00407

Length: 190±0.5mm

Width: 155±0.5mm

Diameter: 43±0.5mm

Material: ABS

Color: White

Weight: 115g

Note: The above data is for reference only,

Please refer to the actual product,

Customization available with provided drawings or samples

Injection Molding Time

The injection molding time referred to here is the time required for the plastic melt to fill the cavity, excluding auxiliary time such as mold opening and closing. Although the injection time is very short and has little impact on the molding cycle, adjusting the injection time plays a significant role in controlling the pressure of the gate, runner, and cavity. Reasonable injection time helps achieve ideal melt filling and is crucial for improving the surface quality of products and reducing dimensional tolerances.

Injection time is much shorter than cooling time, approximately 1/10 to 1/15 of the cooling time. This rule can serve as a basis for predicting the total molding time of plastic parts. In mold flow analysis, the injection time in the analysis results equals the injection time set in the process conditions only when the melt is entirely pushed into the cavity by screw rotation. If screw holding pressure switching occurs before the cavity is filled, the analysis result will be greater than the set process condition.